JZ sinking winch

Product Introduction

JZ series sinking winches are used in coal mine, metal mine, non-metallic mine for hanging the swaying tray, water pump, air compressor, grouting tube, wind-cone and other excavation facilities, also can use for hanging heavy loads on surface and underground. mine winch with hydraulic thrust Failsafe brake  for mine shaft lifting and pulling. variable speed , local contril and radio remote control.. The features: 1.set one/two  hydraulic thrust Failsafe brake and one hydraulic disk  drum brake, 2.compact in structure, easy to operation, safe and reliable. frequency conversion  and joystick controller for speed control.

3. emergency stop, power failure safety brake, over winding protection

Main Parameter

Model			JZ-5/400	JZA-5/600	JZ-10/800/1000	JZ-16/800	JZ-16/1000/1300	JZ-25/1300/1500
Maximum Static Tension of Rope			5000KG	5000KG	10000KG	16000KG	16000KG	25000KG
Rope Capacity			400M	600M	800/1000M	800M	800/1300M	1300/1500M
Mean Speed of Rope	High Speed		6M/MIN	6M/MIN	6M/MIN	6M/MIN	6M/MIN	6M/MIN
	Low Speed		3M/MIN	3M/MIN	3M/MIN	3M/MIN	3M/MIN	3M/MIN
Twisting Layers			6 Layers	10 Layers	7 Layers	6 Layers	7 Layers	9 Layers
Rope Diameter			23MM	23MM	31MM	40MM	40MM	52MM
Winding Drum	Diameter		400MM	400MM	800MM	1000MM	1000MM	1050MM
	Width		900MM	1000MM	1050MM	1400MM	1400MM	1560MM
	Center Height		650MM	580MM	800MM	1050MM	1050MM	1250MM
Speed Ratio	Reducer	High Speed	50	50	63.5	77	77	77
		Low Speed	100	100	127	154	154	154
	Overall gear ratio	High Speed	252.5	252.5	388	506.6	506.6	506.6
		Low Speed	505	505	776	1013.2	1013.2	1013.2
Motor	Model		Y160L-6	Y160L-6	Y200L2-6	YR250M1-8	YR250M1-8	YZR280M-8
	Power		11KW	11KW	22KW	30KW	30KW	55KW
	Rotate Speed		970 Rp/M	950 Rp/M	970 Rp/M	720 Rp/M	720 Rp/M	728 Rp/M
	Voltage		380V	380V	380V	380V	380V	380V

http://www.chinacoalintl.com/

sales@chinacoalintl.com

0086-537-2351381/2161090