Profile
RYF-12 oil-water separator can effectively remove the compressed air in the dust, water, oil mist. This series of products in addition to water, oil capacity, a wide range of adaptation. With a displacement of small, low noise, cylinder design is reasonable, small resistance, oil-water separator after passing gas, high quality, good effect. p>
RYF series oil water separator has good technical properties and a wide selection of resistance, to the compressed air contaminants (oil, water, dust) for effective filtration of the treated air can be achieved without a liquid oil, water and micron solid particles.
Working principle
There are a lot of oil and compressed air into the solids separator, the rotation along the inner wall from the core under the effect produced, the water sucked out from the gas stream flows along the wall down to the bottom of the water separator, and the filter cartridge. When the gas through the filter, because the filter block, inertial impaction, and van der Waals forces between molecules, static electricity and the vacuum suction which was firmly adhered to the fiber, and gradually increased to become droplets, drop under gravity into the bottom of the separator.
Characteristic
1, reasonable cylinder design, the flow of gas in the cylinder body is more reasonable, reducing resistance
2, the gas filtration to 0.1μm higher quality, better effect
3, increased filtration area of the filter, reducing drag, extending the life of the filter.
4, the inner and outer layer is made of plastics rust treatment, rust effect, to avoid the compressed air is secondary pollution.
Technology Parameter
Model：RYF-12oil-water separator
Rated air handle volume （Nm3/min）：13
in ,out pipe dia.DN（mm）：50
Height：1080
Pipe dia.：Φ219
Weight （kg）：62
没有评论:
发表评论